|
行業標準規范英漢對照-通用零部件1
1 GB/T 2-1985 緊固件 外螺紋零件的末端 Fasteners--Ends of parts with external thread
2 GB/T 8-1988 方頭螺栓 C級 Square head bolts--Product grade C
3 GB/T 10-1988 沉頭方頸螺栓 Flat countersunk square neck bolts
4 GB/T 11-1988 沉頭帶榫螺栓 Flat countersunk nib bolts
5 GB/T 12-1988 半圓頭方頸螺栓 Cup head square neck bolts
6 GB/T 13-1988 半圓頭帶榫螺栓 Cup head nib bolts
7 GB/T 15-1988 大半圓頭帶榫螺栓 Cup head nib bolts with large head
8 GB/T 22-1976 小六角頭導頸螺栓 Bolts, small hexagon head with fit neck
9 GB/T 23-1976 小六角頭螺桿帶孔螺栓 Bolts, small hexagon head with hole through the shank
10 GB/T 24-1976 小六角頭螺桿帶孔導頸螺栓 Bolts, small hexagon head with fit neck and hole through the shank
11 GB/T 25-1976 小六角頭頭部帶孔螺栓 Bolts, small hexagon head with holes through the head
12 GB/T 26-1976 小六角頭頭部帶孔導頸螺栓 Bolts, small hexagon head with fit neck and holes through the head
13 GB/T 27-1988 六角頭鉸制孔用螺栓 A和B級 Hexagon fit bolts--Product grade A and B
14 GB/T 28-1988 六角頭螺桿帶孔鉸制孔用螺栓 A和B級 Hexagon fit bolts with Split pin hole on shank--Product grade A and B
15 GB/T 29.1-1988 六角頭頭部帶槽螺栓 A和B級 Hexagon bolts with slot on head--Product grade A and B
16 GB/T 29.2-1988 十字槽凹穴六角頭螺栓 Cross recessed hexagon bolts with indentation
17 GB/T 31.1-1988 六角頭螺桿帶孔螺栓 A和B級 Hexagon bolts with split pin hole on shank--Product grade A and B
18 GB/T 31.2-1988 六角頭螺桿帶孔螺栓 細桿 B級 Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B
19 GB/T 31.3-1988 六角頭螺桿帶孔螺栓 細牙 A和B級 Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B
20 GB/T 32.1-1988 六角頭頭部帶孔螺栓 A和B級 Hexagon bolts with wire holes on head--Product grade A and B 21 GB/T 32.2-1988 六角頭頭部帶孔螺栓 細桿 B級 Hexagon bolts with wire holes on head--Reduced shank--Product grade B
22 GB/T 32.3-1988 六角頭頭部帶孔螺栓 細牙 A和B級 Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B
23 GB/T 35-1988 小方頭螺栓 B級 Square head bolts with small head--Product grade B
24 GB/T 37-1988 T型槽用螺栓 Bolts for T-Slot
25 GB/T 38-1976 螺栓 技術條件 Bolts--Technical requirements
26 GB/T 39-1988 方螺母 C級 Square nuts--Product grade C
27 GB/T 41-1986 1 型六角螺母 C 級 Hexagon nuts--Style 1--Product grad C
28 GB/T 56-1988 六角厚螺母 Hexagon thick nuts
29 GB/T 61-1976 螺母 技術條件 Nuts--Technical requirements
30 GB/T 62-1988 蝶形螺母 Wing nuts
31 GB/T 63-1988 環形螺母 Lifting nuts
32 GB/T 65-1985 開槽圓柱頭螺釘 Slotted cheese head screws
33 GB/T 67-1985 開槽盤頭螺釘 Slotted pan head screws
34 GB/T 68-1985 開槽沉頭螺釘 Slotted countersunk head screws
35 GB/T 69-1985 開槽半沉頭螺釘 Slotted raised countersunk head screws
36 GB/T 70-1985 內六角圓柱頭螺釘 Hexagon socket cap head screws
37 GB/T 71-1985 開槽錐端緊定螺釘 Slotted set screws with cone point
38 GB/T 72-1988 開槽錐端定位螺釘 Slotted set screws with cone point
39 GB/T 73-1985 開槽平端緊定螺釘 Slotted set screws with flat point
40 GB/T 74-1985 開槽凹端緊定螺釘 Slotted set screws with cup point
41 GB/T 75-1985 開槽長圓柱端緊定螺釘 Slotted set screws withlong dog point
42 GB/T 77-1985 內六角平端緊定螺釘 Hexagon socket set screws with flat point
43 GB/T 78-1985 內六角錐端緊定螺釘 Hexagon socket set screws with cone point
44 GB/T 79-1985 內六角圓柱端緊定螺釘 Hexagon socket set screws with dog point
45 GB/T 80-1985 內六角凹端緊定螺釘 Hexagon socket set screws with cup point
46 GB/T 83-1988 方頭長圓柱球面端緊定螺釘 Square set screws with long dog point and rounded end
47 GB/T 84-1988 方頭凹端緊定螺釘 Square set screws with cup point
48 GB/T 85-1988 方頭長圓柱端緊定螺釘 Square set screws with long dog point
49 GB/T 86-1988 方頭短圓柱錐端緊定螺釘 Square set screws with short dog point and cone end
50 GB/T 89-1976 螺釘 技術條件 Screws--Technical requirements
51 GB/T 90-1985 緊固件驗收檢查、標志與包裝 Acceptance inspection,marking and packaging of fasteners
52 GB/T 91-1986 開口銷 Split pins
53 GB/T 93-1987 標準型彈簧墊圈 Single coil spring lock washers--Normal type
54 GB/T 94.1-1987 彈性墊圈技術條件 彈簧墊圈 Specifications for spring washers--Single coil spring lock washers
55 GB/T 94.2-1987 彈性墊圈技術條件 齒形、鋸齒鎖緊墊圈 Specifications for spring washers--Toothed lock and serrated lock washers
56 GB/T 94.3-1987 彈性墊圈技術條件 鞍形、波形彈性墊圈 Specifications for spring washers--Curved and wave spring washers
57 GB/T 95-1985 平墊圈-C級 Plain washers--Product grade C
58 GB/T 272-1993 滾動軸承 代號方法 Rolling bearing--Identification code
59 GB/T 273.1-1987 滾動軸承 圓錐滾子軸承 外形尺寸方案 Rolling | 